Sunset Valley Railroad
Rail Bender for 250 or 332 Rail please state which rail when ordering
£85.00 Ex Tax: £70.83
SVR Track Gauge
£5.00 Ex Tax: £4.17
The actuator is screwed to the headblocks of the switch and the throw pin is inserte..
£33.43 Ex Tax: £27.86
Adaptor set to connect the system to an air compressor. Has a 1/8”NPT and a ¼” NPT ma..
£6.38 Ex Tax: £5.32
Barb and Plug
Screw the barb into a fitting and push a hose onto the barb for a permanent connect..
£0.95 Ex Tax: £0.79
Set of two valves. These operate in the same way as a 2 way electri..
£59.95 Ex Tax: £49.96
An elbow (ELL) to make a right angle turn out of the actuator.
£2.90 Ex Tax: £2.42
Strongly recommended if your compressor does not have a filter on the outlet ..
£29.95 Ex Tax: £24.96
Hose is UV resistant brown colored polyurethane. Simply push onto the barbed fittings of com..
£3.90 Ex Tax: £3.25
Indicator, to tell if the line to each switch is activated. No electrical power require..
£15.95 Ex Tax: £13.29
Manifolds are used for controlling multiple switches. Four sizes are available, with 4,..
£18.19 Ex Tax: £15.16
Use a Quick Disconnect when you need to frequently break a line, for example acr..
£2.80 Ex Tax: £2.33
A small ball in the shuttle blocks one port when the other is pressurized, allowing..
£19.95 Ex Tax: £16.63
Solenoid valve and manifold
Solenoid valve to pneumatically control switches using an electrical ..
£46.00 Ex Tax: £38.33
The groundthrow changes the direction of the switch and locks the point blades firmly against the ou..
£20.00 Ex Tax: £16.67
Showing 1 to 15 of 18 (2 Pages)