Your shopping cart is empty!
SVR Toggle Switch
The toggle switch is best mounted on a panel for convenience. Connect the back port to the supply, the side port to the turnout.
The actuator is screwed to the headblocks of the switch and the throw pin is inserte..
An elbow (ELL) to make a right angle turn out of the actuator.
Toggle switch cover
The toggle switch has a nickel plated lever, however this can still rust..
Manifolds are used for controlling multiple switches. Four sizes are available, with 4,..
Hose is UV resistant brown colored polyurethane. Simply push onto the barbed fittings of com..
Adaptor set to connect the system to an air compressor. Has a 1/8”NPT and a ¼” NPT ma..
Tee and Union
Use a Tee to operate two turnouts simultaneously from one toggle switch. Use a Unio..
Solenoid valve and manifold
Solenoid valve to pneumatically control switches using an electrical ..
Use a Quick Disconnect when you need to frequently break a line, for example acr..
Indicator, to tell if the line to each switch is activated. No electrical power require..
A small ball in the shuttle blocks one port when the other is pressurized, allowing..
Set of two valves. These operate in the same way as a 2 way electri..
Strongly recommended if your compressor does not have a filter on the outlet ..